Not Logged On
Browse by:  «Manufacturers»  or  «Categories»    «Shopping cart is empty. »

Categories for Mobile Computing, Accessories, Chargers and Cradles, ProClip Quick Release Docks


You are here: Categories > Mobile Computing > Accessories > Chargers and Cradles > ProClip Quick Release Docks

MOBILE-COMPUTING/ACCESSORIES/CHARGERS-AND-CRADLES/PROCLIP-QUICK-RELEASE-DOCKS Item List


First Page ... 6 - 7 - 8 - 9 - 10 - 11 - 12 ... Last Page
(Items 121 to 135 of 295 Items Listed)
ImagePart/MfgDescriptionMSRP *Select
527577527577PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL FOR HARD WIRED INSTALLATION APPLE IPAD AIR Charging Holder for Hard-Wired Installation. Custom fit to your bare device -Includes tilt-swivel to angle holder 15 degrees any direction. Allows rotation between portrait and landscape view. IPAD AIR CHARGE HARDWIRED Charging Holder for Hard-Wired Installation. Custom fit to your bare device iPad 9.7 (5th Gen 2017 & 6th Gen 2018) and iPad Air. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Due to the size of the iPad it may block buttons or not fit on your dashboard when used with a vehicle dashboard mount. Please review where your ProClip dashboard mount will be located and check if the iPad will fit in that location.
NC/NR IPAD AIR CHARGE HARDWIRED
PROCLIP USA, NCNR, CHARGING HOLDER WITH TILT SWIVEL FOR HARD WIRED INSTALLATION APPLE IPAD AIR
$255.82
OCR
527845527845ProClip Adj Charge Holder 75-89/12-16mm
ADJ CHARGE HOLDER 75-89/12-16MM
$177.65
OCR
530188530188PROCLIP USA, NCNR, VEHICLE VEHICLE CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG -KENWOOD NX-200/300 (FOR USE IN NIMH, LI-ION AND LI-POLY BATTERIES
VEHICLE CHARGER Kenwood NX-200/300
PROCLIP USA, VEHICLE VEHICLE CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG -KENWOOD NX-200/300 (FOR USE IN NIMH, LI-ION AND LI-POLY BATTERIES
$277.14
OCR
530277530277PROCLIP USA, VEHICLE CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG - INTERMEC CN70 charging holder w/cigarette lighter plug CHARGING HOLDER W/CIGARETTE LIGHTER PLUG CN70 CHARGE CIGLIGHT Charging Holder with Cigarette Lighter Plug. Custom Fit For: Honeywell Intermec CN70. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12 /24 V to 5 V output. LED illuminated power indicator
Honeywell CN70 CHARGE CIGLIGHT
NC/NR HONEYWELL CN70 CHARGE CIGLIGHT
PROCLIP USA, NCNR, VEHICLE CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG - INTERMEC CN70
$213.18
OCR
530370530370ET1 CHG HOLDER, CIG PLUG CHG HOLDER; CLA - ZEBRA ET1$312.67
OCR
530411530411PROCLIP USA, CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG - ZEBRA ET1 (WORKS WITH OR WITHOUT THE HAND STRAP) ET1(BEZEL) CHG HLDR, CIG PLUG CHG HOLDER; CLA - ZEBRA ET1 (BEZEL) Charging Holder for Zebra ET1 with Cigarette Lighter Plug. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Works with or without the Hand Strap. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 139 cm. Works in 12 / 24 V vehicle power outlets. Power plug converts from 12 /24 V to 5 V output. LED illuminated power indicator Charging Holder for Zebra ET1 with Cigarette Lighter Plug. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Works with or without the Hand Strap. Charging cable permanently attached to holder. Coiled cord length is 19 inch / 49 cm. Stretched cord length is 55 inch / 13$277.14
OCR
532188532188PROCLIP USA, NCNR, VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - KENWOOD NX-200/300 (FOR USE WITH LI-ION AND LI-POLY BATTERIES)
Charge Holder Kenwood NX200/300
PROCLIP USA, VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - KENWOOD NX-200/300 (FOR USE WITH LI-ION AND LI-POLY BATTERIES)
$198.97
OCR
532277532277PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL FOR FIXED INSTALLATION INTERMEC CN70
ProClip Charge Cradle for Honeywell CN70
NC/NR PROCLIP CHARGE CRADLE FOR HONEYWEL
PROCLIP USA, NCNR, CHARGING HOLDER WITH TILT SWIVEL FOR FIXED INSTALLATION INTERMEC CN70
CHARGE CRADLE FOR HONEYWELL CN70
$262.93
OCR
532367532367Charging Holder - Motorola (Symbol) CP200$277.14
OCR
532370532370ET1 CHG HLDR, HARD-WIRED CHG HOLDER; FIXED INSTALL - ZEBRA ET1$312.67
OCR
532411532411PROCLIP USA, CHARGING HOLDER. FOR HARD WIRED INSTALLATION - ZEBRA ET1 (WORKS WITH OR WITHOUT THE HAND STRAP) ET1(BZL) CHG HLDR, HARD-WIRED CHG HOLDER; FIXED INSTALL - ZEBRA ET1 (BEZEL) PROCLIP USA, DISCONTINUED, NO REPLACEMENT, CHARGIN Charging Standard Holder for Hard-Wire Installation. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Works with or without the Hand Strap. Charging cable permanently attached to holder. Cord length with black box is 96 inch / 243 cm. Provides 10 Watts (2A) charging power. Hard-wire to 12 / 24 V vehicle power sources. Black box converts from 12 / 24 V to 5 V output$277.14
OCR
535481535481Charging Holder with Tilt Swivel, Key Lock and Cigarette Lighter Plug. Getac Z710 Features & Benefits -Always keep your battery fully charged -Works in 12 and 24 volt vehicles -Access to all ports -Key Lock Block for added security and hold -Works with or without the Hand Strap -Charging cable attached to holder -Dock type connection (Pogo Pin Style) -Made of high grade ABS plastic -Manufactured in Sweden -AMPS hole pattern for easy attachment to wall, pedestal or dashboard vehicle mount Z710 CHARGE KEYLOCK CIGLIGHT$355.31
OCR
539650539650PROCLIP USA, KEY LOCK STANDARD HOLDER
Large Universal Tablet Holder, Key Lock
PROCLIP USA, NCNR, KEY LOCK STANDARD HOLDER
$170.54
OCR
539768539768Panasonic FZ-M1 Hldr, Tilt Swivel, Key Lck PANASONIC FZ-M1 HLDR, TILT SWIVEL, KEY LCK FZ-M1 HOLDER KEYLOCK PANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 PANASONIC Key Lock Standard Holder Custom Fit For: Panasonic FZ-B2 & FZ-M1 without a case. Easily slide device in and out of holder - Includes Tilt-Swivel to angle holder 15 degrees any direction - Rotate between portrait and landscape view.
PANASONIC FZ-M1 HOLDER KEYLOCK
NC/NR PANASONIC FZ-M1 HOLDER KEYLOCK
$227.39
OCR
539783539783Panasonic FZ-M1 Hldr, Tilt Swvl, Key/Cable PROCLIP USA, PANASONIC FZ-B2 HOLDER WITH TILT SWIVEL, KEY LOCK AND CABLE ATTACHEMENT PANASONIC FZ-M1 HLDR, TILT SWVL, KEY/CABLE FZ-M1 HOLDER KEYLOCK CABLEATTCH Key Lock Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. For Use With or Without Handstrap. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please contact us via phone. Key Lock Holder with Cable Attachment. Custom Fit For: Panasonic FZ-B2 & FZ-M1. For Use With or Without Handstrap. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. This is a special order item. Please allow an additional 2-3 week lead time. All holders are keyed randomly. If you need all keys to be the same on a multi-piece order please con$255.82
OCR
* Corporate discount prices are available. Please contact us for your corporate pricing. Please contact us for your corporate pricing. Prices are in Canadian Dollars.
First Page ... 6 - 7 - 8 - 9 - 10 - 11 - 12 ... Last Page

Call us at 1-800-853-7226
Content on the OCR and Levata Web sites is for informational purposes only. Please contact our sales representative for product details.
©2025 Levata. Stock Website V3.02 All rights reserved. All other implied copyrights, trademarks, or patents are the property of their respective owners.