| Image | Part/Mfg | Description | MSRP * | Select |
 | 241438 | STANDARD HOLDER Cognex MX-1000/MX-1502 PROCLIP USA, STANDARD HOLDER COGNEX MX-1000/MX-150 This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Combine with a ProClip vehicle mount to make a full mounting solution This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Combine with a ProClip vehicle mount to make a full mounting solution This is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an uprigh | $144.88 | |
| OCR |
 | 241439 | STANDARD HOLDER W/ VIBRATION DAMPERS Cognex MX-1000/MX-1502 This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Includes rubber vibration dampers for rough environments This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Includes rubber vibration dampers for rough environments This is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your devic | $202.83 | |
| OCR |
 | 241828 | Monitor Mount Plate - Zebra CS60 | $94.16 | |
| OCR |
 | 241865 | ProClip Holder for OtterBox Power Bank
PROCLIP USA, HOLDER WITH TILT-SWIVEL FOR OTTERBOX POWER BANK FITS 78-80642 (20, 000 MAH)
PROCLIP USA, NCNR, HOLDER WITH TILT-SWIVEL FOR OTTERBOX POWER BANK FITS 78-80642 (20, 000 MAH) | $108.65 | |
| OCR |
 | 241911 | AMPS Adapter Plate for DTG Power Carts | $43.45 | |
| OCR |
 | 241912 | Tablet Mounting Kit for Western Union | $304.25 | |
| OCR |
 | 241924 | Hub Cover with Cable Retention | $260.79 | |
| OCR |
 | 246565 | GOLF CART STEERING COLUMN MOUNT PROCLIP, GOLF CART MOUNT WITH QUICK RELEASE ATTACH GOLFCART STEERING COLUMN MOUNT PROCLIP USA, GOLF CART MOUNT WITH QUICK RELEASE AT Golf Cart Mount With Quick Release Attachment. Custom made pedestal designed to be attached to the steering column on a golf cart. Pre-installed quick release move clip ensures compatibility with all ProClip device holders. AMPS ring allows you to re-position the angle to ensure optimal placement of your device. Thumb screw allows quick and easy installation and removal without damaging the column. Vertical arm tilts and rotates to allow maximum visibility Golf Cart Mount With Quick Release Attachment. Custom made pedestal designed to be attached to the steering column on a golf cart. Pre-installed quick release move clip ensures compatibility with all ProClip device holders. AMPS ring allows you to re-position the angle to ensure optimal placement of your device. Thumb screw allows quick and easy installation and removal without damaging the c | $369.46 | |
| OCR |
| 246646 | NC/NR Holder Top Support Sonim XP7 SMART | $202.83 | |
| OCR |
 | 266PSCHDLGB-UB | Description: 1/4 Camera Mount Ball
Description: 1/4 Cam Mount Ball
NC/NR DESCRIPTION: 1/4 CAM MOUNT BALL | $21.72 | |
| OCR |
 | 510813 | ProClip Holder for Getac F110
NC/NR PROCLIP HOLDER FOR GETAC F110 | $159.36 | |
| OCR |
 | 532367 | Charging Holder - Motorola (Symbol) CP200 | $231.81 | |
| OCR |
 | 539816 | PROCLIP USA, MICROSOFT SURFACE PRO 4 HOLDER WITH TILT SWIVEL, KEY LOCK AND PEN SUPPORT, MUST NOTE ON PO IF HOLDERS NEED TO BE KEYED ALIKE
Holder for Microsoft Surface Pro 7/6/5/4
NC/NR HOLDER FOR MICROSOFT SURFACE PRO 7
PROCLIP USA, NCNR, MICROSOFT SURFACE PRO 4 HOLDER WITH TILT SWIVEL, KEY LOCK AND PEN SUPPORT, MUST NOTE ON PO IF HOLDERS NEED TO BE KEYED ALIKE | $159.36 | |
| OCR |
 | 539867 | PROCLIP USA, KEY LOCK HOLDER FOR MICROSOFT SURFACE PRO 4 WITH UAG CASE
NC/NR Holder, Key Lock, Surface Pro Metr
PROCLIP USA, NCNR, KEY LOCK HOLDER FOR MICROSOFT SURFACE PRO 4 WITH UAG CASE | $159.36 | |
| OCR |
 | 541706 | ProClip Holder for Getac T800
NC/NR PROCLIP HOLDER FOR GETAC T800 | $130.39 | |
| OCR |
* Corporate discount prices are available. Please contact us for your corporate pricing. Please contact us for your corporate pricing. Prices are in Canadian Dollars.
