Not Logged On
Browse by:  «Manufacturers»  or  «Categories»    «Shopping cart is empty. »

OCR Categories for Mobile Computing, Accessories, Chargers and Cradles, ProClip Cradles Zebra Handheld Devices


You are here: Manufacturers > OCR > Mobile Computing > Accessories > Chargers and Cradles > ProClip Cradles Zebra Handheld Devices

OCR/MOBILE-COMPUTING/ACCESSORIES/CHARGERS-AND-CRADLES/PROCLIP-CRADLES-ZEBRA-HANDHELD-DEVICES Item List


First Page - 2 - 3 - 4 - 5 - 6 - 7 - 8 - Last Page
(Items 61 to 75 of 133 Items Listed)
ImagePart/MfgDescriptionMSRP *Select
512926512926PROCLIP USA, ZEBRA TC56 - CHARGING CRADLE WITH TILT SWIVEL, MOLEX PIG TAIL CABLE AND CIGARETTE LIGHTER PLUG - ONLY FOR USE WITH RUGGED BOOT Chrg Holdr w Cig Lighter Plug 4 ZEB Boot CHRG HOLDR W CIG LIGHTER PLUG 4 ZEB BOOT TC51/52/56/57w/BOOT CHARGE CIGLIGHT Charging Holder with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction. Tilt-swivel also allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Charging Holder with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction. Tilt-swivel also allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Charging Cradle with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Includes Tilt-Swivel to allow holder to angle 15 d$230.99
OCR
512927512927CHARGING HOLDER WITH TILT SWIVEL, MOLEX PIG TAIL CABLE AND CIGARETTE LIGHTER PLUG - Zebra TC51 TC52 TC56 TC57 PROCLIP USA, CHARGING HOLDER WITH CIGARETTE LIGHTE
Zebra TC5x Charging Holder with Cig Plug
PROCLIP USA, CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG (FOR DEVICE WITHOUT ZEBRA RUGGED BOOT), CUSTOM FIT FOR: ZEBRA TC51/52/56/57
NC/NR ZEBRA TC5X CHARGING HOLDER WITH CI
PROCLIP USA, NCNR, CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG (FOR DEVICE WITHOUT ZEBRA RUGGED BOOT), CUSTOM FIT FOR: ZEBRA TC51/52/56/57
$230.99
OCR
512959512959topsupport chg holdr w cig plug/zeb boot PROCLIP, ZEBRA TC56 CHARGING HOLDER WITH TOP HOLD, PROCLIP USA, ZEBRA TC56 CHARGING HOLDER WITH TOP H TOPSUPPORT CHG HOLDR W CIG PLUG/ZEB BOOT TC51/52/56/57w/BOOT CHRGE TP-SPRT CIGLHT Top Support Charging Holder with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Top support for more secure fit. Angle holder 15 degrees in any direction. Allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Top Support Charging Holder with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Top support for more secure fit. Angle holder 15 degrees in any direction. Allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Top Support Charging Cradle with Cigarette Lighter Plug (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Top support for more secure fit - Angle cradle 15 degrees in any direction - A$237.99
OCR
513013513013PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL AND STRAIGHT POWER CORD FOR FIXED INSTALLATION - ZEBRA MC55/65/67 MC67 CHG HLDR, HARD-WIRED CHG HOLDER; FIXED INSTALL - ZEBRA MC55/65/67 CHG HOLDER; FIXED INSTALL - ZEBRA MC55'65'67 MC55/65/67 CHARGE HARDWIRED Charging Holder for Hard-Wired Installation. Custom Fit For: Zebra MC55 / MC65 / MC67. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra MC55 / MC65 / MC67 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
ZEB MC55/65/67 CHARGE HARDWIRED
NC/NR ZEB MC55/65/67 CHARGE HARDWIRED
$195.99
OCR
513497513497PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL. FOR HARD WIRE INSTALLATION -(ONLY FOR THE MC40 WITH THE INTEGRATED MAGNETIC STRIPE READER) MC40(MSR) CHG HLDR, HARD-WIRED CHG HOLDER; TOP HOLD; FIXED INSTALL - ZEBRA MC40 (MSR) This charging cradle is a cradle style mount custom made for a perfect fit for the MC40 with integrated magnetic stripe reader. It has a dock connector for easy connection of the device to the cradle and a power cord for hard-wiring to a permanent power source in the vehicle.
ZEBRA MC40(MSR) CHG CRDL, HARD-WIRED
NC/NR ZEBRA MC40(MSR) CHG CRDL, HARD-WIRE
$195.99
OCR
513498513498MC45 CHG HLDR, HARD-WIRED CHG HOLDER; TOP HOLD; FIXED INSTALL - ZEBRA MC45 This charging cradle is custom made for a perfect fit with your device. It has a dock connector for easy connection of the device to the cradle and a power cord for hard-wiring to a permanent power source in the vehicle.
ZEBRA MC45 CHG CRDL, HARD-WIRED
NC/NR ZEBRA MC45 CHG CRDL, HARD-WIRED
$195.99
OCR
513528513528MC40 CHG HLDR, HARD-WIRED, CHG HOLDER; TOP HOLD; FIXED INSTALL - ZEBRA MC40 (NO MSR) This charging cradle is custom made for a perfect fit for the MC40 without integrated magnetic stripe reader. It has a dock connector for easy connection of the device to the cradle and a power cord for hard-wiring to a permanent power source in the vehicle.
ZEBRA MC40 CHG CRDL, HARD-WIRED,
NC/NR ZEBRA MC40 CHG CRDL, HARD-WIRED,
$195.99
OCR
513601513601PROCLIP USA, VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - ZEBRA TC55 TC55 CHG HLDR, HARD-WIRED CHG HOLDER FOR FIXED INSTALL - ZEBRA TC55 TC51/52/56/57 CHARGE HARDWIRED Vehicle Charging Holder for Hard-Wired Installation. Custom Fit For: Zebra TC55. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view Vehicle Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC55 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
ZEB TC51/52/56/57 CHARGE HARDWIRED
NC/NR ZEB TC51/52/56/57 CHARGE HARDWIRED
PROCLIP USA, NCNR, VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - ZEBRA TC55
$216.99
OCR
513605513605PROCLIP USA, VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - ZEBRA TC55 (FOR DEVICE WITH TC55 BOOT) TC55(BOOT) CHG HLDR, HD-WIRED CHG HOLDER FOR FIXED INSTALL - ZEBRA TC55 with Boot TC51/52/56/57w/BOOT CHARGE HARDWIRED Vehicle Charging Holder for Hard-Wired Installation. (For device with TC55 Boot.) Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Charging cable permanently attached to holder. Cord length with black box is 96 inch / 243 cm. Black power conversion box is 3 inch / 7.6 cm. Provides 10 Watts (2A) charging power. Hard-wire to 12 / 24 V vehicle power sources. Black box converts from 12 / 24 V to 5 V output. LED illuminated power indicator Vehicle Charging Holder for Hard-Wired Installation. (For device with TC55 Boot.) Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Charging cable permanently attached to holder. Cord length with black box is 96 inch / 243 cm. Black power conversion$195.99
OCR
513707513707PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL. FOR HARD WIRE INSTALLATION ZEBRA TC70 TC75 CHG HLDR, HARD-WIRED CHG HOLDER ; FIXED INSTALL - ZEBRA TC70/75 CHG HOLDER ; FIXED INSTALL - ZEBRA TC70'75 TC70/72/75/77 CHARGE HARDWIRED Charging Holder for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
ZEB TC70/72/75/77 CHARGE HARDWIRED
NC/NR ZEB TC70/72/75/77 CHARGE HARDWIRED
PROCLIP USA, NCNR, CHARGING HOLDER WITH TILT SWIVEL. FOR HARD WIRE INSTALLATION ZEBRA TC70
$216.99
OCR
513857513857TC75 TOP SPRT HD CHG HLDR, HARD-WIRED PROCLIP USA, HEAVY DUTY CHARGING HOLDER WITH TOP S TC70/72/75/77 CHARGE TOP-SUPRT HARDWIRED Top Support Heavy Duty Charging Holder for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Hard-wire to 12 ~ 24 V vehicle power sources. Provides 10 Watts (2A) charging power Top Support Heavy Duty Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Hard-wire to 12 ~ 24 V vehicle power sources - Provides 10 Watts (2A) charging power
ZEB TC70/72/75/77 CHG TOP-SUPRT HARDWIRE
PROCLIP USA, HEAVY DUTY CHARGING HOLDER WITH TOP SUPPORT FOR HARD-WIRED INSTALL; ZEBRA TC75
NC/NR ZEB TC70/72/75/77 CHG TOP-SUPRT HA
PROCLIP USA, NCNR, HEAVY DUTY CHARGING<
$377.99
OCR
513862513862PROCLIP USA, ZEBRA TC70 / TC75 CHARGING CRADLE WIT CHARGING HOLDER WITH USB HOST CABLE AND TOP SUPPORT. FOR HARD WIRED INSTALLATION Top Support Heavy Duty Charging Holder for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75. Includes USB host cable for data syncing. Custom fit to your bare device. Rotating Top Support for added device stability in rough environments. USB Host cable for syncing of other devices. Tilt-swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. Hard-wire to 12 ~ 24 V vehicle power sources. Provides 10 Watts (2A) charging power Top Support Heavy Duty Charging Cradle for Hard-Wired Installation. Custom Fit For: Zebra TC70 and TC75. Includes USB host cable for data syncing. Custom fit to your bare device - Rotating Top Support for added device stability in rough environments - USB Host cable for syncing of other devices - Tilt-swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view - Hard-wire to 1$405.99
OCR
513926513926Charging Holder for Hard-Wired Install CHARGING HOLDER FOR HARD-WIRED INSTALL TC51/56 CHARGE HARDWIRED PROCLIP USA, CHARGING HOLDER FOR HARD-WIRED INSTAL Charging Holder for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Custom fit to device with rugged boot. Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction. Tilt-swivel also allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Charging cradle for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Custom fit to device with rugged boot - Includes Tilt-Swivel to allow cradle to angle 15 degrees in any direction - Tilt-swivel also allows for portrait and landscape view - AMPS hole pattern for attachment to any mount
ZEB TC51/56 CHARGE HARDWIRED
PROCLIP USA, CHARGING HOLDER FOR HARD-WIRED INSTALLATION (FOR DEVICE WITH ZEBRA RUGGED BOOT)
PROCLIP USA, NCNR, CHARGING HOLDER FOR HARD-WIRED INSTALL
$209.99
OCR
513927513927Charging Holder for Hard-wired Installation (for Device without Zebra Rugged Boot) Custom Fit For: Zebra TC51/52/56/57 Custom fit to bare device Includes Tilt-Swivel to allow holder to angle 15 degrees in any direction Tilt-swivel also allows for portrait and landscape view AMPS hole pattern for attachment to any mount PROCLIP USA, ZEBRA CHARGING CRADLE FOR HARD-WIRED
PROCLIP USA, ZEBRA CHARGING CRADLE FOR HARD-WIRED INSTALLTION (FOR DEVICE WITHOUT ZEBRA RUGGED BOOT) CUSTOM FIT FOR ZEBRA TC51/52/56/57
NC/NR CHARGING HOLDER FOR HARD-WIRED INS
PROCLIP USA, NCNR, ZEBRA CHARGING CRADLE FOR HARD-WIRED INSTALLTION (FOR DEVICE WITHOUT ZEBRA RUGGED BOOT) CUSTOM FIT FOR ZEBRA TC51/52/56/57
$209.99
OCR
513959513959Charging Cradle with Top Support for Hard Wired Install; TC56 in Rugged Boot PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL. FOR TC51/52/56/57 CHARGE TOP-SUPRT HARDWIRED Top Support Charging Holder for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Custom fit to device with rugged boot. Top support for more secure fit. Angle holder 15 degrees in any direction. Allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Top Support Charging Holder for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57. Custom fit to device with rugged boot. Top support for more secure fit. Angle holder 15 degrees in any direction. Allows for portrait and landscape view. AMPS hole pattern for attachment to any mount Top Support Charging Cradle for Hard-Wired Installation (for Device with Zebra Rugged Boot). Custom Fit For: Zebra TC51/52/56/57 - Custom fit to device with rugged boot - Top support for m$237.99
OCR
* Corporate discount prices are available. Please contact us for your corporate pricing. Please contact us for your corporate pricing. Prices are in Canadian Dollars.
First Page - 2 - 3 - 4 - 5 - 6 - 7 - 8 - Last Page

Call us at 1-800-853-7226
Content on the OCR and Levata Web sites is for informational purposes only. Please contact our sales representative for product details.
©2025 Levata. Stock Website V3.02 All rights reserved. All other implied copyrights, trademarks, or patents are the property of their respective owners.