| Image | Part/Mfg | Description | MSRP * | Select |
 | 241438 | STANDARD HOLDER Cognex MX-1000/MX-1502 PROCLIP USA, STANDARD HOLDER COGNEX MX-1000/MX-150 This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Combine with a ProClip vehicle mount to make a full mounting solution This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Combine with a ProClip vehicle mount to make a full mounting solution This is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an uprigh | $139.99 | |
| OCR |
 | 241439 | STANDARD HOLDER W/ VIBRATION DAMPERS Cognex MX-1000/MX-1502 This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Includes rubber vibration dampers for rough environments This is a custom made holder that keeps your device in an upright position for better viewing. Easily slide your device in/out of the holder. The holder comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, or pedestal mounts. Custom fit to your bare device. Includes rubber vibration dampers for rough environments This is a custom made holder for the COGNEX MX-1000/MX-1502 that keeps your device in an upright position for better viewing. Easily slide your devic | $195.99 | |
| OCR |
 | 241828 | Monitor Mount Plate - Zebra CS60
PROCLIP USA, NCNR, MONITOR MOUNT - ZEBRA CS60 AND CS60-HC SERIES SCANNERS | $90.99 | |
| OCR |
 | 241865 | ProClip Holder for OtterBox Power Bank
PROCLIP USA, HOLDER WITH TILT-SWIVEL FOR OTTERBOX POWER BANK FITS 78-80642 (20, 000 MAH)
PROCLIP USA, NCNR, HOLDER WITH TILT-SWIVEL FOR OTTERBOX POWER BANK FITS 78-80642 (20, 000 MAH) | $104.99 | |
| OCR |
 | 241911 | AMPS Adapter Plate for DTG Power Carts | $41.99 | |
| OCR |
 | 241912 | Tablet Mounting Kit for Western Union | $293.99 | |
| OCR |
 | 241924 | Hub Cover with Cable Retention | $251.99 | |
| OCR |
 | 246565 | GOLF CART STEERING COLUMN MOUNT PROCLIP, GOLF CART MOUNT WITH QUICK RELEASE ATTACH GOLFCART STEERING COLUMN MOUNT PROCLIP USA, GOLF CART MOUNT WITH QUICK RELEASE AT Golf Cart Mount With Quick Release Attachment. Custom made pedestal designed to be attached to the steering column on a golf cart. Pre-installed quick release move clip ensures compatibility with all ProClip device holders. AMPS ring allows you to re-position the angle to ensure optimal placement of your device. Thumb screw allows quick and easy installation and removal without damaging the column. Vertical arm tilts and rotates to allow maximum visibility Golf Cart Mount With Quick Release Attachment. Custom made pedestal designed to be attached to the steering column on a golf cart. Pre-installed quick release move clip ensures compatibility with all ProClip device holders. AMPS ring allows you to re-position the angle to ensure optimal placement of your device. Thumb screw allows quick and easy installation and removal without damaging the c | $356.99 | |
| OCR |
| 246646 | NC/NR Holder Top Support Sonim XP7 SMART | $195.99 | |
| OCR |
 | 266PSCHDLGB-UB | Description: 1/4 Camera Mount Ball
Description: 1/4 Cam Mount Ball
NC/NR DESCRIPTION: 1/4 CAM MOUNT BALL | $20.99 | |
| OCR |
 | 510813 | ProClip Holder for Getac F110
NC/NR PROCLIP HOLDER FOR GETAC F110 | $167.99 | |
| OCR |
 | 511156 | PROCLIP USA, HOLDER WITH TILT SWIVEL - ZEBRA/ZEBRA MC9500 MC9500 PASSIVE HOLDER PASSIVE HOLDER - ZEBRA MC9500 MC9500 HOLDER Holder with Tilt-Swivel. Custom Fit For: Zebra MC9500. Custom fit to your bare device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view Cradle with Tilt-Swivel. Custom Fit For: Zebra MC9500 - Custom fit to your bare device - Includes Tilt-Swivel to angle cradle 15 degrees any direction - Rotate between portrait and landscape view
ZEBRA MC9500 CRADLE
NC/NR ZEBRA MC9500 CRADLE
PROCLIP USA, NCNR, HOLDER WITH TILT SWIVEL - ZEBRA/ZEBRA MC9500 | $139.99 | |
| OCR |
 | 522699 | PROCLIP USA, CHARGING HOLDER WITH TILT SWIVEL, CIGARETTE LIGHTER PLUG AND USB ON-THE-GO CABLE ZEBRA MC9500 MC9500 CHG HLDR, CLA, USB OTG CHG HOLDER; CLA AND USB ON-THE-GO CABLE - ZEBRA MC9500 MC9500 CHARGE USBOTG CIGLIGHT Charging Holder with Cigarette Lighter Plug and 18 in. USB on-the-go Cable. Custom Fit For: Zebra MC9500. Custom fit to your device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. USB On-The-Go cable permanently attached to holder for data transfer. Combine with a ProClip vehicle mount to make a full mounting solution Charging Holder with Cigarette Lighter Plug and 18 in. USB on-the-go Cable. Custom Fit For: Zebra MC9500. Custom fit to your device. Includes Tilt-Swivel to angle holder 15 degrees any direction. Rotate between portrait and landscape view. USB On-The-Go cable permanently attached to holder for data transfer. Combine with a ProClip vehicle mount to make a full mounting solution Charging Cradle with Cigarette Ligh | $279.99 | |
| OCR |
 | 530188 | PROCLIP USA, NCNR, VEHICLE VEHICLE CHARGING HOLDER WITH CIGARETTE LIGHTER PLUG -KENWOOD NX-200/300 (FOR USE IN NIMH, LI-ION AND LI-POLY BATTERIES
VEHICLE CHARGER Kenwood NX-200/300 | $272.99 | |
| OCR |
 | 532188 | PROCLIP USA, NCNR, VEHICLE CHARGING HOLDER FOR FIXED INSTALLATION - KENWOOD NX-200/300 (FOR USE WITH LI-ION AND LI-POLY BATTERIES)
Charge Holder Kenwood NX200/300 | $195.99 | |
| OCR |
* Corporate discount prices are available. Please contact us for your corporate pricing. Please contact us for your corporate pricing. Prices are in Canadian Dollars.
