| Image | Part/Mfg | Description | MSRP * | Select |
 | ATS70GB | STAND, TRIPOD SPEAKER Lightweight and easily portable, the ATS70GB deploys quickly and then locks securely with two tough locking knobs and a safety pin. With a 40" tripod base and telescoping center riser, this stand will reach heights from 50" to 77", yet it folds down to an easy-handling 41-1/2" x 5". The entire stand weighs only 6 pounds. Despite its own modest weight, the stand will support speakers weighing up to 150 lbs. Lightweight and easily portable, the ATS70GB deploys quickly and then locks securely with two tough locking knobs and a safety pin. With a 40" tripod base and telescoping center riser, this stand will reach heights from 50" to 77", yet it folds down to an easy-handling 41-1/2" x 5". The entire stand weighs only 6 pounds. Despite its own modest weight, the stand will support speakers weighing up to 150 lbs. | $124.27 | |
| Bogen |
 | BIDI70VBS | Bi-Directional Wall Speaker | $179.58 | |
| Bogen |
 | BUFEX | BUFEX Buffer-Expander Volume Control (Attenuator, Expander for Amplified Speakers, 24V) A continuously variable speaker attenuator that can remotely control the volume of network speakers. Drive up to 150 self-amplified speaker inputs. 100V, 70V, 25V, and page port level selectable input. Bypass trim control for emergency paging (12dB of preset control over level of bypass announcements). Mounts in a single gang electrical box. A continuously variable speaker attenuator that can remotely control the volume of network speakers. Drive up to 150 self-amplified speaker inputs. 100V, 70V, 25V, and page port level selectable input. Bypass trim control for emergency paging (12dB of preset control over level of bypass announcements). Mounts in a single gang electrical box. | $88.91 | |
| Bogen |
 | CMP1R | Compressor Limiter Module Compressor/limiter module that can be used as a compressor to minimize the differences in level of all of the inputs on the mix bus, or can be used as a limiter to keep overal output at a desired level. Compressor ratio control, threshold control, and make-up gain control. Bypass switch. Unbalanced input with low priority. Gradual fade back from mute for unbalanced input. | $327.55 | |
| Bogen |
 | LU35W70VAT | 35-Watt 70-Volt Attenuator | $78.60 | |
| Bogen |
 | LUADS | Analog Door Phone Speaker Analog Door Speaker Phone | $467.73 | |
| Bogen |
 | LULCST | Call Stacker (Comcode - 408184018) CALL STACKER | $6,168.63 | |
| Bogen |
 | LURC70VS | Recessed Round Ceiling Speaker - (70 Volt) EOL | $112.78 | |
| Bogen |
 | LUSQIN70VS | Warehouse Indoor Speaker This is an indoor surface-mount paging speaker enclosure with a full-range speaker in protective industrial enclosure. This speaker is suitable for beams/trus mounting and is perfect for home centers, warehouse stores, and industrial environments. | $153.79 | |
| Bogen |
 | LUSQOT70VS | Warehouse Outdoor Speaker This is an outdoor surface-mount paging speaker enclosure with a full-range speaker in weather-protected enclosure. This speaker is perfect for outdoor areas such as garden centers, lumber yards, warehouses, and hotel courtyards. | $191.38 | |
| Bogen |
 | LUUDC | Universal Doorphone Controller (with Speaker and Contact Closure) | $926.71 | |
| Bogen |
 | LUUDS | Universal Connection Door Phone Speaker Universal Doorphone Speaker | $433.22 | |
| Bogen |
 | MIC1S | MIC1S Input Module (for use with M300-450-600 and V35-V60-V150-V250 Model Amplifiers) The MIC1S is a transformer-balanced microphone input module with a screw terminal connector. This module has 24V phantom power and is bus assignable. The MIC1S is a transformer-balanced microphone input module with a screw terminal connector. This module has 24V phantom power and is bus assignable. | $204.74 | |
| Bogen |
 | MIC1X | Mic Input Module (Transformer Balance XLR) The MIC1X is a transformer-balanced microphone input module with an XLR connector. This module has 24V phantom power and is bus assignable. | $204.74 | |
| Bogen |
 | PEQ1R | PEQ1R Parametric Equalizer, 4-band equalizer, 2 full parametric bands The PEQ1R is a 4-band equalizer that provides 2 mid bands of parametric equalization control with adjustments for filter bandwidth ('Q'), filter center frequency, cut or boost level, as well as cut or boost for bass and treble. Each mid band of EQ has adjustable bandwidths from 0.16 to 1.5 octaves. The PEQ1R is a 4-band equalizer that provides 2 mid bands of parametric equalization control with adjustments for filter bandwidth ('Q'), filter center frequency, cut or boost level, as well as cut or boost for bass and treble. Each mid band of EQ has adjustable bandwidths from 0.16 to 1.5 octaves. | $334.10 | |
| Bogen |
* Corporate discount prices are available. Please contact us for your corporate pricing. Please contact us for your corporate pricing. Prices are in Canadian Dollars.
