| Image | Part/Mfg | Description | MSRP * | Select |
 | 100142 | Steel AMPS Adapter Plate for Zebra VC80, VC80x PROCLIP USA, STEEL AMPS ADAPTER PLATE FOR ZEBRA VC Adapts the VC80, VC80x back hole pattern to industry standard AMPS. Threaded for M4 screws. Recessed for flush mounting
Steel AMPS Adapt Plate for Zeb VC80/80x | $130.04 | |
| OCR |
 | 100164 | CFLD Shifting Plate for Oracle Micros POS Terminal
CFLD Shifting Plate, including fasteners
NC/NR CFLD SHIFTING PLATE, INCLUDING FAST | $123.05 | |
| OCR |
 | 100166 | Scanner Bracket for Oracle Micros POS - MOQ - 25 Units
Scanner Bracket Oracle Micros POS, MOQ25
NC/NR SCANNER BRACKET ORACLE MICROS POS, | $116.05 | |
| OCR |
 | 100370 | PROCLIP USA, SILVER BACKING PLATE, 4MM AMPS PATTER AMPS Dashboard Backer Plate
PROCLIP USA, SILVER BACKING PLATE, 4MM AMPS PATTERN
PROCLIP USA, NCNR, SILVER BACKING PLATE, 4MM AMPS PATTERN | $11.17 | |
| OCR |
 | 213065 | PROCLIP USA, VERTICAL EXTENSION PLATE Position your device higher or lower on the mount. The Vertical Extension Plate attaches to the ProClip Dashboard Mount or directly to a flat surface. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face. Position your device higher or lower on the mount. The Vertical Extension Plate attaches to the ProClip Dashboard Mount or directly to a flat surface. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face. Position your device higher or lower on the mount. The Vertical Extension Plate attaches to the ProClip Dashboard Mount or directly to a flat surface. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face.
PROCLIP USA, NCNR, VE | $15.37 | |
| OCR |
 | 215183 | PROCLIP USA, HORIZONTAL EXTENSION PLATE FOR LEFT/ HORIZONTAL EXTENSION PLATE FOR LEFT/ RIG Standard Left/Right Extension Plate. 100 x 50 x 5 mm (3.94 x 1.97 x 0.20 in). Avoid interference with the dashboard controls/displays when using wide devices. To extend your device to the left or right from the Vehicle Mount (especially the ProClip Angled Mount) to avoid interference with the dashboard controls/displays. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screws can be used to screw anywhere into the mount face. Standard Left/Right Extension Plate. 100 x 50 x 5 mm (3.94 x 1.97 x 0.20 in). Avoid interference with the dashboard controls/displays when using wide devices. To extend your device to the left or right from the Vehicle Mount (especially the ProClip Angled Mount) to avoid interference with the dashboard controls/displays. Extension plates may not line up with the pre-drilled holes on your ProClip mount. The included self-tapping screw | $15.37 | |
| OCR |
 | 215522 | PROCLIP USA, PEDESTAL MOUNT ROUND BASE PLATE - 4" DIAMETER (FOR SOLID CORE PEDESTALS) PEDESTAL MOUNT ROUND MOUNTING PLATE 4 IN This Pedestal Mount Round Mounting Plate creates an extra sturdy and secure mounting platform that can be used in aircrafts, boats and a variety of vehicles e.g. personal vehicles, commercial vehicles, emergency vehicles, police vehicles, trucks, tractors, fork lifts and RVs. Additionally, the Pedestal Mount Extension Rod can be used with mounts in retail stores, kiosks, gyms, conference rooms, trade shows etc.
PROCLIP USA, NCNR, PEDESTAL MOUNT ROUND BASE PLATE - 4" DIAMETER (FOR SOLID CORE PEDESTALS) | $41.94 | |
| OCR |
 | 215527 | PROCLIP USA, LOCKING MOVE CLIP MALE PLATE Adapter Plate for Holders without Tilt-Swivel
Adapter Plate - Holders w/o Tilt-Swivel
PROCLIP USA, NCNR, LOCKING MOVE CLIP MALE PLATE | $22.36 | |
| OCR |
 | 215659 | VESA PROCLIP ADAPTER PLATE PROCLIP USA, VESA ADAPTER PLATE WITH 4 INTEGRATED MOUNT PLATE VESA 75 100MM INSET The VESA ProClip adapter plate attaches to any existing 75mm and 100mm VESA mounting system to create a new flat mounting surface to allow the attachment of ProClip specific mounts and other mounts/devices.
PROCLIP USA, VESA ADAPTER PLATE WITH 4 INTEGRATED NUTS
PROCLIP USA, NCNR, VESA ADAPTER PLATE WITH 4 INTEGRATED NUTS | $37.74 | |
| OCR |
 | 215807 | PEDESTAL MOUNT ROUND MOUNTING PLATE 8IN This base will give the stability needed to use the pedestal as part of a free-standing solution. This also for a more portable pedestal setup which can be easily moved but is still strong and sturdy. Round base is 200 mm in diameter (7.9 in). Supports heavy devices This base will give the stability needed to use the mount as part of a free-standing solution. This also for a more portable mount setup which can be easily moved but is still strong and sturdy. - Round base is 200 mm in diameter (7.9 in) - Supports heavy devices
ROUND BASE MOUNTING PLATE 8IN | $41.94 | |
| OCR |
 | 215916 | Extension plate allows a MSR device holder to be added to the ET5X with rugged frame Pre-drilled AMPS hole pattern Made from durable ABS plastic
EXTENSION PLATE FOR MSR DEVICE
NC/NR EXTENSION PLATE FOR MSR DEVICE | $39.14 | |
| OCR |
 | 216042 | PROCLIP USA, VESA ADAPTER PLATE RECESSED METAL WIT VESA Adapter Plate Recessed Steel with AMPS Hole Pattern The VESA ProClip adapter plate attaches to any existing VESA 75mm or 100mm mounting system. Use to create a new recessed mounting surface to allow the attachment of ProClip specific holders. 4 pre-drilled AMPS pattern pilot holes to attach ProClip holders more securely. 5 mm Diameter Holes accommodate up to M5 screws
PROCLIP USA, VESA ADAPTER PLATE RECESSED METAL WITH AMPS HOLE PATTERN
PROCLIP USA, NCNR, VESA ADAPTER PLATE RECESSED METAL WITH AMPS HOLE PATTERN | $50.33 | |
| OCR |
 | 216044 | Heavy Duty Steel Extension Plate 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm) This Extension Plate has pre-drilled holes for the AMPS hole pattern. This allows additional holders to be added to existing mounts. It features up to 5 positions in either portrait or landscape orientation. Additional holes allow for cables to be run through the plate for a clean installation. Extension plate allows an additional device holder to be added. Multiple Locations for AMPS hole pattern mounts. Made from durable steel. 11.8 in (30 cm) x 2.36 in (6 cm) x .12 in (3 mm) PROCLIP USA, HEAVY DUTY STEEL EXTENSION PLATE 11.8
PROCLIP USA, HEAVY DUTY STEEL EXTENSION PLATE 11.8 IN (30 CM) X 2.36 IN (6 CM) X .12 IN (3 MM)
PROCLIP USA, NCNR, HEAVY DUTY STEEL EXTENSION PLATE 11.8 IN (30 CM) X 2.36 IN (6 CM) X .12 IN (3 MM) | $48.93 | |
| OCR |
 | 216076 | Short Extension Plate | $48.93 | |
| OCR |
 | 241315 | PROCLIP USA, QUICK RELEASE DOCK, 45MM QUICK REELEA Quick Release Dock, 45 mm QUICK RELEASE, NON-CHARGING
Proclip Quick Release Dock 40mm Lever
PROCLIP USA, QUICK RELEASE DOCK, 45MM QUICK REELEASE, NON-CHARGING
PROCLIP USA, NCNR, QUICK RELEASE DOCK, 45MM QUICK REELEASE, NON-CHARGING | $41.94 | |
| OCR |
* Corporate discount prices are available. Please contact us for your corporate pricing. Please contact us for your corporate pricing. Prices are in Canadian Dollars.
